Costinbuc's Ideas and Experiments

Hellow all 

In order to do something practical until I will fully understand ZPM model, and many more stuff, I was  thinking to make a replica of  T.Bearden MEG in my view to see if that”ping-pong” is showing.
Layout is like this:

 Available coils below, but I do not have any idea where and which in which place

2,9 mH +/-3% 2,1 Ω = 4 pcs – wire diameter 0.63mm
0,940mH +/-3% 0,500Ω = 4 pcs – wire diameter  1 mm
1,450mH +/-3% 0,470Ω = 2 pcs – wire diameter 1,2 mm
2,100mH +/-3% 0,460Ω = 2 pcs – wire diameter 1,4 mm

Please help !   

The only missing part for the moment is permanent magnet 

L=68mm W=15mm D=25mm

BR-- CB