Beyond Unity - BUNK "OverUnity Transformer" Finally SCHEMATIC and REPLICATION available

worldcup posted this 14 March 2026

FInally after many years of long wait and arguments on OU, etc etc bunk decides to release the secrets.. ENJOY (Download video copy / materials before it vanishes from internet) ..Load up your kachers 😀

"Bunk" Kapanadze Variant Device Compilation, Real Deal, With Schematics.. (schematic at end of this video)

Download and mirror as much you guys can from this channel - https://www.youtube.com/@merlit1962/videos

watch all vids from merlit1962, shorts, Posts, Community, there is gold everywhere on his channel. He could have so easily not given us anything, but gave us everything

---

Successful Bunk Replication, within days of released schematics, MerLit1962 MIRROR

But essentially, it's a relatively small, simplified Kapanadze transformer. The secret is the use of simple aluminum layers inside the coil body, 2 split foils, for both halves of the form, the lower end foil is hit with a certain Positive pulse train, the first winding is held Negative, while the upper foil becomes INTENSELY active, and having an output on the heavy winding. Not a primary to secondary induction, but a rapid changing of voltages between the upper and lower foils, with a 50 hz interruption circuit. Rather than having to move massive currents to induce an output... he is alternating Voltages instead. Bunk has a small transformer like this, doing 4 kw off the 9v. Must see. I will try to upload more too for preservation here.

bunk

Liked by
and 2 others

andy2 posted this 6 days ago

You posted faked video, later you deleted that post. Admin can see this in history. You have lost trust.

A.

Liked by

hackoa posted this 5 days ago

Any ideas of coils windings and AWG? Approximately. About the core, the only one i find is MPP CM270125, 26.9x14.7x11.2mm 125u AL:157nH/N2 with material permeability from 60ui to 173ui. for 45 euro.

Liked by

Vasile posted this 5 days ago

Replying To: bunk

Bunk, what Andy is trying to say is that posting haotically, information that is and isn't of your own making, like you did in the last 1 to 2 week period, deleting your posts, reposting them, deleting again, not explaining in detail how they work, doesn't actually help much. As I said before it is more usefull if you post JUST ONE schematic, of the simplest device you have, in which you explain the principle so that everyone can understand and we can replicate and spread it so that everyone can have a more efficient life, energetic wise. The real question now is: Can you do that?

Regards,

Vasile

Liked by
and 4 others

Fernando posted this 5 days ago

Thanks Mr.

The conclusion is that magnetic poles of the coil have been changed by
moving the magnetic shield from the right to the left. This alternate change of the
magnetic poles will induce an electric voltage in the coil. So, here we have
dynamic induction of electromotive force without moving either magnet or the
coil. This method is not given in standard school or university books which
explain Faraday’s law of the induction.
The next important thing to know is the behavior of the metal plate passing
close to the magnet. The author found on the internet, a picture shown below and
the following description of the process:
“The piece of metal passing the magnet loses no energy. The velocity of
the metal increases as it nears the magnet, and decreases as it leaves, but both
in equal amounts. So from frame 1 to frame 3, no energy is lost.
You can prove this to yourself by tying a piece of metal to a string, taping
a button magnet to a table, and letting the metal swing back and forth above the
magnet. It does so for a long time, and only slows down due to air friction and
energy lost in the string’s vibration”.

The idea moving metal disc between magnets and coil It is super interesting.

If you have more info about this topic , if you can share will be great.

Liked by

Mitza84 posted this 5 days ago

Hi mr.Bunk can you help with the schematic of the first version of the first device this in the photo it would be amazing because is totaly diferent then the rest of them . thank you

Liked by

Vasile posted this 5 days ago

Quoting:bunk

Vasile, I am not a teacher for anyone here;

Okay so the answer to the question I just asked you "Can you post JUST ONE schematic, of the simplest device you have, in which you explain the principle so that everyone can understand and we can replicate and spread it so that everyone can have a more efficient life, energetic wise?" is... YOU CAN'T. I am glad we have cleared that up. I just had the impression, from the first posts you made here, that you are a wise teacher who came to enlighten us, but it appears, from your sayings, that it is not the case.

Liked by

Kdkinen kurtsvids posted this 5 days ago

I think people here are just asking too much and experimenting too little. Prove me wrong.

Regarding anything Bunk posts, we should accept all of it, be thankful, and try it out !

Bunk is not asking for money, And everything I've seen of him post is valid.

And especially Bunk's own device versions, are the most impressive. Which is what we should focus on.

I think this all took a dump when people asked for so-called "safe" to experiment materials.

Then out of Bunk's kindness he shared a self-looped mechanical alternator, Vasmus, Akula, Ruslan, RomeroUk... All valid builders and open with their work.

Well Akula vanished, and Ruslan K Live channel keeps taking down his stuff, despite letting schematics out, RomeroUk made all private, and Vasmus doesn't post much anymore.

Yet here is Bunk, someone who carries the secrets and is willing to communicate with us. Its like if Tesla was here offering words.... you would listen, and never complain. I am amazed he is here offering comments and hinting to his methods.

Thank you Bunk, you are a God among experimenters from my observations.

And no one else's education matters here if they can't run the 200 watt lamps off the 9v ! You are below Bunk's intelligence.

Liked by

hackoa posted this 4 days ago

I think we have to receive the same effects like in this video.

Liked by

Vasile posted this 4 days ago

Quoting:Kdkinen kurtsvids

This will be my last post on this thread, regarding this subject, as I do not want to derail it. I will make another thread if there will be more to discuss on the matter.

I think people here are just asking too much and experimenting too little.

I was also like you at the begining, trying every schematic I found posted online, hoping that something will work. It didn't. So after many years, I am trying to look for principles, not schematics posted randomly and with no explanation.

And everything I've seen of him post is valid

He has posted tens of circuits, some of them that aren't even his. Have you tryed everything he has posted?

And especially Bunk's own device versions, are the most impressive

Can you show some of his devices and what is the impressive part about them?

I think this all took a dump when people asked for so-called "safe" to experiment materials

No, it has nothing to do with that, but it has all of it to do with the fact that he posted haotically, deleting his own posts, posting again the same stuff, deleting again, not responding to peoples questions objectively and on the subject.

Then out of Bunk's kindness he shared a self-looped mechanical alternator

Can you post a detailed schematic of that alternator with full explanations so that we can have repeatability of that device?

Yet here is Bunk, someone who carries the secrets

How do you know he carries "the secrets"? What is your proof?

you would listen, and never complain

So tangible proof (simple and exact schematics with explanations) that everyone can replicate is called "complaining"?

And no one else's education matters here if they can't run the 200 watt lamps off the 9v

You are making it sound like I judged someone elses education. I dind't.

You are below Bunk's intelligence.

How do you know that? What does that even have to do with anything discused here?

My own conclusion: This bunk thing is starting to look like a cult for some. It gives off Chris Sykes/aboveunity.com vibes. Anyways I wish it ends up somewhere practical and usefull for everyone.

Liked by

evostars posted this 4 days ago

Replying To: bunk

Bunk, you have definitly inspired me, and no doubt others also. You showed us it can be done.

Once the magic is understood it will be clear and logical.

For me it says, power is induced voltage and current. Voltage induced from a changing magnetic field.

current can be induced in several unique ways. current is energy flow.

a spargap capacitor discharge has very strong currents which can be combined with voltage from a changeing magnetic field.

the coils also have capacity. which should be used.

I hope you keep inspiring us Bunk. Please show us the steps we should take to get to the goal. thank you!

Liked by